In 2020, the “black swan” epidemic caused a blowout growth in the mask industry. The price of masks doubled, meltblown cloth increased 40 times, and meltblown cloth equipment was in short supply. At the same time, the 630 stainless steel material used in meltblown cloth equipment also became more valuable!
According to the tracking of I Want Stainless Steel, domestically, the price of 630 stainless steel used to manufacture meltblown cloth equipment has soared from 16,000-17,000 yuan before the New Year to the current 26,000-27,000 yuan/ton. The price of imported 630 has also soared to 45,000 yuan/ton. The price of 630 imported from Europe will be higher.
At present, meltblown cloth equipment is mainly concentrated in Europe. Due to the sudden outbreak of the epidemic, the demand for masks has exploded. As the main supplier of masks, China’s demand for meltblown cloth manufacturing machines has also been rising steadily. As an important part of meltblown cloth manufacturing equipment, the use of 630 flat steel is surging.
So where is 630 flat steel used in meltblown cloth? Why must 630 stainless steel be used in meltblown equipment?
With these questions, see the detailed answers below.
What Is 630 Stainless Steel?
Precipitation Hardening Stainless Steel
17-4PH & 15-5PH Precipitation Hardening Stainless Steel Supplier | Factory Price & Stock Available Precipitation Hardening Stainless Steel (PH Stainless Steel)High Strength • Excellent Corrosion
630 stainless steel is a precipitation, hardening, martensitic stainless steel composed of copper, niobium/columbium.
It is also commonly known as 17-4PH stainless steel, with 17 Cr content, and 4 Ni content, and PH is the English for precipitation hardening steel.
It has high strength, high hardness, good welding performance, and corrosion resistance. At present, it has been widely promoted and used in valves, shafts, and chemical fiber industries and high-strength parts with certain corrosion resistance requirements.
The national standard grade is 0Cr17Ni4Cu4Nb stainless steel, new 05Cr17Ni4Cu4Nb stainless steel.
SUS630 Stainless Steel Chemical Composition
| C | Si | Mn | S | P | Cr | Ni | Cu | Nb |
| ≤0.07 | ≤1. 00 | ≤1.00 | ≤0.030 | ≤0.035 | 15. 50~17.50 | 3.00~5. 00 | 3. 00~5.00 | 0. 15~0. 45 |
The performance characteristics of 630 stainless steel are that the strength level can be easily adjusted, which can be adjusted by changing the heat treatment process. The martensitic phase transformation and aging treatment to form precipitation hardening phase are its main strengthening means. 630 stainless steel has good attenuation performance, strong corrosion fatigue resistance and water drop resistance.
Precipitation hardening steel with copper added. Used to manufacture shafts and turbine components.
This grade has high strength, hardness (up to 3008°C/572°F) and corrosion resistance.
After heat treatment, the mechanical properties of the product are more perfect, and the compressive strength can reach up to 1100-1300 mpa (160-190 ksi).
This grade cannot be used at temperatures above 300°C (572°F) or at very low temperatures. It has good corrosion resistance to the atmosphere and dilute acids or salts. Its corrosion resistance is the same as 304 and 430.
Main Application Areas
Offshore platforms, helicopter decks, other platforms
Food industry
Pulp and paper industry
Aerospace (turbine blades), mechanical parts
Nuclear waste barrels
Huaxiao Special Alloy Steel Products
Inconel 617
Home › Steel Products › Special Alloy › Inconel Alloy › Inconel 617 Inconel 617 Supplier – UNS N06617 / W.Nr. 2.4663 Nickel Alloy Products UNS N06617 / 2.4663 — Co-Reinforced
Inconel 601
Home › Steel Products › Special Alloy › Inconel Alloy › Inconel 601 Inconel 601 — Al-Enhanced Heat Resistant Alloy UNS N06601 / 2.4851 / NiCr23Fe — Al₂O₃ protective film, industry-leading carburization
Inconel X-750
Inconel X-750 The Spring & Fastener Superalloy UNS N07750 — precipitation-hardened nickel superalloy with unmatched spring relaxation resistance to 815°C (1500°F). When springs must hold their
Inconel 600
Home › Steel Products › Special Alloy › Inconel Alloy › Inconel 600 Inconel 600 Supplier – UNS N06600 Nickel Alloy Products UNS N06600 / 2.4816 — Standard Ni-Cr High-Temperature Alloy
Inconel 718
Inconel 718 Nickel Superalloy — AMS 5662/5663 Bar, Forging, Sheet Supplier The strongest commercially available nickel-iron-chromium alloy. Gamma-prime & gamma-double-prime precipitation hardened to 1375 MPa
Inconel 625
Inconel 625 (UNS N06625 / 2.4856) — The Corrosion Champion of Nickel Superalloys Best Seller — Best Corrosion Resistance Huaxiao Metal supplies Inconel 625 sheet,
13-8 Mo Stainless Steel
13-8 Mo Stainless Steel Bar, Plate & Forging Supplier AMS 5629 / UNS S13800 / 1.4534 High-Strength PH Stainless Steel Huaxiao Metal supplies high-performance 13-8
17-7PH Stainless Steel
Leading 17-7PH Stainless Steel Supplier | AISI 631 Sheet, Strip, Coil & Foil in Stock Certified AMS 5528 / ASTM A693 / UNS S17700 Precipitation
15-5PH Stainless Steel
15-5PH Stainless Steel Supplier | UNS S15500 Plate & Bar Stock 15-5 PH Stainless Steel – High Toughness PH Grade Huaxiao Metal supplies 15-5PH stainless
