PPGI/PPGL/PPGF Steel Suppliers

PPGI/PPGL/PPGF Coils Sizes
Pre-painted Hot-dip Galvanized Steel Coil
Thickness: 0.2~1.5mm
Width: 700~1534mm
Width: 700~1534mm
Pre-painted 5% Al-Zn Coated Steel Coil
Thickness: 0.2~1.5mm
Width: 700~1260mm
Width: 700~1260mm
Pre-painted 55% Al-Zn Coated Steel Coil
Thickness: 0.2~1.25mm
Width: 700~1220mm
Width: 700~1220mm
Available Specification of PPGI/PPGL/PPGF:
Product Type | Coating Type | Product Spec. | Substrate Spec. | Coating Designation | Coating Thickness | ||
1. Pre-painted Hot-dip Galvanized Steel Coil (PPGI) 2. Pre-painted Hot-dip 5% Al-Zn Coated Steel Coil (PPGF) 3. Pre-painted Hot-dip 55%Al-Zn Coated | 1. Polyester 2. Silicone Modified 3. Acrylic 4. PVDF | JIS G3312 (1994) | CGCC, CGCH, CGCD1, CGC340, CGC400, CGC440, CGC490, CGC570 | JIS G3302 (1998) | SGCC, SGCH, SGCD1, SGC340, SGC400, SGC440, SGC490, SGC570 | JIS G3302 Z10, Z12, Z18, Z20, Z22, Z25, Z27,Z35 | Top Primer: Top Coat: Back Coat: |
JIS G3318 | CZACC, CZACH, CZACD1, CZAC340, CZAC400, CZAC440, CZAC490, CZAC570 | JIS G3317 (1994) | SZACC, SZACH, SZACH1, SZAC340, SZAC400, SZAC440, SZAC490, SZAC570 | JIS G3317 (1994) Y12, Y18, Y20, Y22, Y25, Y27 | |||
JIS G3322 (1998) | CGLCC, CGLCD, CGLC400, CGLC440, CGLC490, CGLC570 | JIS G3321 (1998) | SGLCC, SGLC400, SGLC440, SGLC490, SGLC570 | JIS G3321 (1998) AZ90, AZ120, AZ150, AZ170 | |||
ASTM A755M (2001) | ASTM A653M (2003) | CS TYPE A, B, C FS TYPE A, B SS Grade 230, 255, 275, 340 DDS | ASTM A653M (2003) Z100, Z120, Z180, Z275, Z350 | ||||
ASTM A875M (2002) | ASTM A875M (2002) ZGF90, ZGF135, ZGF180, ZGF225, ZGF275 | ||||||
ASTM A792M (2003) | ASTM A792M (2003) AZ150, AZ165, AZ180 | ||||||
EN 10169 (1997) | EN 10142 (2000) | DX51D, DX52D, DX53D | EN 10142 (2000) Z100, Z140, Z200, Z225, Z275 | ||||
EN 10147 (2000) | S220GD, S250GD, S280GD, S320GD, S350GD, S550GD | EN 10147 (2000) Z100, Z140, Z200, Z225, Z275 | |||||
EN 10214 (1995) | S220GD DX51D, S250GD DX52D, S280GD DX53D, S320GD, S350GD, S555GD | EN 10214 (1995) ZA95, ZA130, ZA185, ZA200, ZA255 | |||||
EN 10215 (1995) | EN 10215 (1995) ZA100, AZ150, AZ185 | ||||||
Remark | 1. Protective Film can be applied 2. The ASTM standards presented here adopt the imperial system (The equivalent metric system is marked by the “M” after the specification number, such as A755M and A792M) 3. Coating Thickness is for reference only. |